It can be very handy to have an electric generator at your home or business. They can be used for a variety of purposes, including lighting outdoor facilities, providing power during outages and helping to run power tools in areas that do not have ready access to electricity. Whenever you are deciding on a generator, one of the main concerns that you must have is the size of the generator. Here are a few considerations to keep in mind when picking out the right sized generator.
It is fairly easy to estimate the amount of electricity that you will need when choosing a generator for emergency power purposes. This type of generator is typically installed by an electrician Los Angeles. Start by listing out all of the appliances and lights that you want to power during an outage. Next to each device, write down the electrical requirements of each device. For light bulbs, you should be writing down the wattage. After you have this baseline amount, add some to it so that you have a little wiggle room. This will help you deal with any miscalculations and additional devices that you may decide to power.
Portable generators follow the same rules as emergency backup generators. Simply determine which devices you will be using the portable generator for and make sure that you choose a generator that is a little bigger than the maximum amount that you will need for your devices. This may require you to add up the requirements of tools, lights, televisions or whatever else you plan to power.
After you have determined how much you need to power with your generator, you can begin the installation process. For assistance in determining the right sized generator, and for installation from start to finish, give us a call at H Electric today.
Although it can be easy to ignore seemingly minor problems with our electrical devices, plugs and outlets, doing so could eventually lead to a more serious issue occurring. Many of these small signs and symptoms are our first indication that there is an issue that requires further inspection. Because of this, doing our due diligence any time you experience any of the following problems can potentially protect you from further repairs, or even catastrophic damage.
Frequently Tripped Breakers
You shouldn’t think that there is anything wrong with going for many years without tripping a breaker. If you have a particular circuit in your home that trips very often, then there is a very good chance that it is overloaded. The issue could also be caused by an electrical short or fault somewhere within your system.
Dimming or Flickering Lights
If you have lights that dim that are not on a dimmer switch, then it could be a sign of improper wiring or an overloaded circuit. Flickering lights are often caused by a problem with the switch, an electrical fault, overloaded circuits or damaged fixture wiring. If you live in an older home that has a 60-amp service panel, then your underpowered appliances and fixtures are probably telling you that it’s time to call your electrician in Los Angeles for an upgrade.
Buzzing or Charred Outlets and Switches
You should never hear buzzing from an outlet, switch or fixture. You should also never experience outlets and switches that are hot to the touch. This is a particularly clear warning sign that there is an issue with your device, the wiring in the box or somewhere along the electrical system.
Any time you experience any of these signs, it is paramount that you call your Los Angeles electrician right away. Our skilled technicians at H Electric are always more than happy to come out and take a look. For tips and tricks for handling some basic electrical issues, get started at www.electricianlosangeles.com.
For many commercial outdoor and indoor operations, there are much better options when it comes to lighting. Making a better choice can positively contribute to many different aspects of our personal and national economic condition. One benefit, which almost no one would deny, is the ability to reduce your monthly electrical bill by 30% – 50%. Some businesses get so caught up in increasing profits that they forget that some simple changes can greatly reduce operating costs.
Replacing or retrofitting your commercial indoor and outdoor light fixtures can make a profound difference on your overall energy costs. In some case, this type of job performed by your electrician in Los Angeles can pay for itself within 24 months. This means that you will start reaping the full benefits of that savings at 100% within just a couple years. In many cases, the amount that you save each month will cover the financing expenses associated with financing a project such as this.
In addition to saving money, many businesses choose to embark on a lighting retrofit project in order to go green. Regardless of the size of your business, there are a number of different opportunities when it comes to using more energy efficient light technologies. The following are some of these:
- Replacing all incandescent light bulbs with CFL or LED bulbs
- Replacing HID fixtures in parking garages with more efficient LEDs or Fluorescents
- Retrofitting or replacing outdated fluorescent fixtures with more energy efficient alternatives
- Using Outdoor Pole-mounted Fluorescents rather than parking-lot HID pole-mounted fixtures
- Replace standard light switches with smart occupancy sensors and dimmer switches
- Use ceiling-mounted occupancy sensors in places such as gyms, cafeterias, meeting rooms and hallways
Simply put, the best place to start when it comes to lowering the electricity usage of your lighting is to replace higher consumption bulbs with lower consumption alternatives. If you want more information on lighting retrofits or the best energy-efficient option for you, contact our team at H Electric.
Even though computer prices are nowhere near where they were ten years ago, your computer is a significant investment and often a very crucial piece in your everyday routine. Whether you need it for school, work or just to browse the web, protecting your computer is a very important part of owning one. One often overlooked danger to your computer is electricity itself. Although surge protection is good enough in its own right to help protect your systems, an Uninterruptable Power Supply (UPS) can offer you a number of benefits that you don’t get from your standard surge protector.
Surge Protection – Your UPS will function as a surge protector that allows you to plug in a variety of electric devices. In most cases, the UPS will resemble a large power strip or cube that has several different electrical outlets for you to plug into.
Backup Power – The biggest reason that people choose a UPS over a standard surge protector is that a UPS provides backup power in the event of an outage. Each power supply comes with an internal battery that stores power for later use. Whenever the UPS loses power, it will seamlessly switch over to its backup supply. This gives you the opportunity to finish and save anything before shutting down your computer properly.
A UPS provides your computer with a versatile, and high-quality source of surge protection and backup power. This backup energy source can be used to help you safely shut down your computer, keep you connected to the internet and more depending on your individual needs. They are available in a variety of sizes, and can be installed without the help of an electrician in Los Angeles. By combining this with a whole house surge protector, installed by the technicians at H Electric (electricianlosangeles.com), you can rest assured that your valuable computing equipment is as safe as it possibly can be.
The smoke detector is one of the most important, but frequently overlooked home safety devices. This important safety element is engineered to detect smoke from fire in your home and alert you with a very high pitched alarm whenever smoke has been detected. If you are sleeping, a properly installed and working smoke detector can be the difference between life and death. By making sure that your smoke alarms are properly installed, maintained and placed in all of the right places in your home, you can improve your chances of avoiding this type of event.
Hardwired Smoke Detectors
The most common type of smoke detectors that people have in their homes are the inexpensive, battery powered smoke detector that you can easily find at almost any store. Slightly more advanced, hardwired smoke detectors offer several benefits over this type of smoke detector. Although a battery powered detector will still detect smoke and sound the alarm whenever it has been detected in or around that particular area, you receive more reliability and coverage with a hardwired smoke detection system. Another bonus is that you do not have to replace the batteries nearly as often. Whenever a hardwired system that has been installed by an electrician in Los Angeles detects smoke, it will trigger not only the alarm that detected the smoke, but all others in your home. Under normal conditions, these smoke alarms are powered by your electrical system. Whenever the power is lost, each detector has its own battery backup so that you can rest assured that you are always covered.
Regular maintenance is just as important as installation. At H Electric, it is our recommendation that you test your smoke detectors regularly, or about once a month. You should also replace the batteries according to the manufacturer’s instructions. With the installation and maintenance of your smoke detectors, you take a large step toward keeping your home and family safe.
There was recently a fire that took hold of a commercial area, leaving three buildings destroyed and devastation to the area both in the form of physical property and intangible assets of each of these businesses.
Fire inspectors did an investigation immediately following the fire, finding that one of the kitchens had a small appliance in the back kitchen that started the fire. Not only did the business that had the faulty appliance lose everything, but also the two businesses right next door. Furthermore, several dozen nearby residents were temporarily displaced as well.
This massive fire took ten fire engines and more than 60 firefighters several hours to control. These buildings, which were all constructed in the early 1900s, had no firewalls between them. This allowed the fire to grow quickly, passing from building to building causing millions of dollars in damage.
In addition to not having firewalls between the buildings, many of these buildings were not up to current electrical standards. Because they were built in the early 1900s, they were not subject to the stringent electrical safety codes that new buildings must follow today. The owners of each building had not worked with an electrician in Los Angeles to ensure that the electrical systems were safe. Had they done this, this situation may have never happened.
Though you may not spend much time thinking about the inner workings of your electrical system, it is very important to have periodic electrical system inspections. This can help identify small problems before they turn into large problems. It is much better to fix a few loose wires, or outdated technologies, than to have to deal with the total devastation caused by an electrical fire. To schedule your electrical safety assessment today, give us a call at H Electric. You can also get in touch with us through our main website at www.electricianlosangeles.com.
Although using aluminum wiring in homes and other buildings is long out of practice, there are still many homes across the United States that are still equipped with this unsafe wiring technology. According to many specialists, this means that any light switch, outlet and junction box connected to a circuit using aluminum wiring is a fire waiting to happen. Aluminum wiring in your home presents a very unique and real danger, and has significant potential for starting a fire if you do not take the proper precautions.
Aluminum wiring was used from the mid-1960s to the early 1970s in many new homes and remodels. It was installed to feed branch circuits coming from the electrical panel and out to light fixtures, outlets and switches. Because of frequent electrical failures in buildings that used aluminum wiring, it quickly became apparent that although the aluminum wiring itself is not dangerous, any place that the wiring makes a connection, whether it be an outlet, a light switch or a junction box, can deteriorate. Whenever these connections deteriorate, they become a significant fire hazard. Many homes have upwards of 200 connections, meaning that there are many potential electrical emergencies in these homes.
Even if your home hasn’t had any electrical issues for the last 30 or 40 years, you should consult with an electrician in Los Angeles if you believe your home may have aluminum wiring installed. If your home still has aluminum wiring used, then there are two main options for your electrician Los Angeles. They can either replace your entire wiring system, or replace every single connection in your home with a specially designed piece of copper wiring. The partial replacement option is by far the most popular, because it is just as safe as a complete rewire, but much less expensive.
If you think that your home may have aluminum wiring, contact our team at H Electric right away. We also have several other resources regarding electrical safety, home rewiring and more at our main site www.electricianlosangeles.com.
If you are faced with an electrical situation that just can’t wait a day or so to be repaired, then it may be necessary to call an emergency electrician in Los Angeles. Whenever you find yourself with this type of problem, do not hesitate to call right away. Waiting to have these issues addressed can often lead to further problems, dangerous situations and even injury. Luckily, most electricians offer emergency after-hours service just for this reason. Our electrical systems are both important for our everyday lives, and powerful enough to need round-the-clock attention.
Is Your Emergency Real?
Keep in mind that after hours rates are higher than an electrician’s standard rates. Before calling an electrician to come take a look at an electrical problem outside of their normal hours, consider whether or not if it is an actual emergency. A great example of an electrical emergency would be losing power at a restaurant that you own. Because an extended outage could lead to the loss of thousands of dollars worth of food and inventory, it can be much more cost effective to pay someone to come fix the problem immediately. Other situations would include any electrical issues that pose an immediate threat to your safety.
After you have called your Los Angeles electrician and know that someone is on the way, all you have to do now is wait. While you are doing so, don’t tinker around with the electricity on your own, especially if there is a dangerous area. The best thing for you to do is wait in a comfortable area until the electrician from H Electric arrives to take a look at your problem. This way you will be ready when they get there, while avoiding any injuries that could make the problem even worse.